How to unlock a car door (without a key)
Make It Easy Mechanic:
locking your keys inside the car sucks
in this video I'm going to unlock three
different vehicles using different
methods and tools to help you figure out
what method works best for your car.
First make sure you have proof it is
your car or whoever you're helping can
prove it is their car. Check every door,
window, trunk or tailgate, and glass! You
just might get lucky. Our first vehicle
has a vertical knob on top of the door
panel and the most accessible tool
you're most likely to have on you is a
shoelace or a string. Make sure it is
long enough to cover the window
diagonally. Step number one - slide the
string in through the top corner of the
door. Tip: now when you go to fit the
string in you might run into weather
stripping and rubber molding that
doesn't let you get past it, so use a
thin object to guide the string in over
the rubber molding. Step number two: once the string is inside move it to one side
of the window and make a slip knot
here's a better view of how to make one:
basically it's like tying your shoe - you
pull on one side it tightens your knot
you pull on the other side it tightens
your loop. Now pull the slip knot into
the window area and try to fit it over
the knob
Here is a tip: if your loop is pointing away
from the knob you can twist the string
and slide the twisted part into the
window area and then pull back to make
the loop point in the right direction,
like this! Once you put the loop over the
knob
pull the string ends apart to tie the
knot and pull up and there we go the
first car is unlocked
next tool we can use is a wire hanger or
any long wire you can find very helpful
tool you can use it in many different
applications unwind the hanger and
straighten it out leaving a hook on one
end. Now let's take a closer look at our
knob - all it really is, is just a rod
going down to the latching mechanism
so what I'm gonna do is let the hook
down between the window and the
weatherstripping
which I do recommend removing to get a
better visual of what's inside the door
catch the rod or the part of the
latching mechanism it is attached to and
pull up and the door is unlocked
another useful tool is a slim jim basic
concept: Pull on one side and push on the
other to navigate the loop that you
would slide over a vertical knob.
Same basic steps you may have to pry the door
a little bit
slide the slim jim down, fit it over the
knob and pull up. I personally don't
really care for this tool, I think it has
very limited application.
However the door is unlocked and let's move on to
the second vehicle this vehicle does not
have a vertical knob, the locking knob
moves horizontally and is significantly
harder to get to but take note - pulling
the door handle unlocks the door!
And we also have a manual window which could be used to our advantage
And now again let's take a closer look
at our locking knob: all it is - is just
another rod that goes to the latching
mechanism moving horizontally instead of
vertically here
I took the latching mechanism out of the
door so you can see that there is a
black piece moving up and down as I move
the rod back and forth. So all we need to
do is pull up on it and the door will be
unlocked. While I'm trying to catch the
mechanism I wanted to mention that your
wiper blades (except curved ones) have
metal rods in them that you can use for
this method just pull the blade end down
to get them exposed. You may have to use
pliers to pull one out, bend it to make a
hook and you're ready to go!
Now back to our board:
I finally caught the mechanism and all I
need to do is pull up and the second car
is unlocked
Now since the inside handle unlocks the
door, we can try to utilize that too
let's grab the other end of our wire
hanger and make a loop about a finger in
size
make sure to twist it a few times so
that it doesn't unwind when you pull on
it
next pry the top corner of the door and
fit a wedge in it. I am using a small ice
scraper to get it started and a wooden
wedge you can use a doorstop or some
wooden kitchenware like spatulas and
such try not to use screwdrivers as they
will damage your paint. Basically you're
just trying to create an opening just
big enough to fit in the wire
once the wire is in throw the loop over
the handle and here I want to share
another tip with you: once you're on the
handle - bring the wire down so that
you're pulling straight back, instead of half up - half back
And there we go! That sweet sound of the
door finally opening. And let me play this one more time!
And finally our third
and most difficult car: It has no
vertical knob, it does have a "lock/unlock" button but pretty hard to get to
the locking tab is cone-shaped and the
door handle does not unlock the door
- pretty tricky. On top of it, it has cables
instead of rods, so nothing to really
grab on to. So the easiest thing to do
here is to use an actual lockout toolkit
used by professionals which consists of:
a long reach tool, inflatable bag, and a
wedge tool. Since this door doesn't have a
metal frame around the glass I'm going
to use the inflatable bag - wedge it in,
inflate it, give yourself some room to
fit the metal rod through. Don't pry it
more than you have to - you don't want to
shatter the glass, obviously.
then just fit in the rod and here you
have two options: you can either push the
unlock button or turn the locking knob.
Now while I'm trying to get it unlocked
I wanted to mention even though most of
you probably don't have a tool kit like
this handy you can try to imitate it
with something like an antenna or a hood
prop rod from another car of course I've
seen people use golf clubs the bottom
line is there are options so don't get
discouraged and use your imagination.
And there we go, our third car is unlocked!
now I am going to try to turn the
locking knob
Thanks to the rubber tip, it takes no time to execute. And again that sweet sound of the door opening
You can also use this tool to open manual
windows, push locking tabs, and pull on
door handles. Now this should be enough
for one video, if it was helpful please
give it a thumbs up in the next video
I'm going to talk more about unlocking
this Subaru and other cars using a less
conventional approach and about
preventing yourself from being locked
out thank you for watching good luck and
take care
How to unlock a car door without keys, the easy way.
brianok100:
hey guys back with another quick video
here I just thought I'd show you the
quickest way that I found to unlock a
car door if you've got your keys locked
inside and you need to get your car door
unlocked this is the quickest and
easiest way that I have found this
particular tool that i'ma show you is
fairly inexpensive it can be bought
online in fact I will put a link down
below in the video description where you
can find it this is a 2015 Dodge Ram
1500 pickup and it's got the vertical
locks here and I'm gonna use this airbag
this particular airbag that's made by
access tools they could be found online
you know various places and they just
get a little bit started there and I'm
gonna throw another one in there just
for good measure and this is basically
the same thing it's just a hair bigger
get it in there and if you don't have
those air bags you can use these wedges
plastic wedges they're sold in various
places all over the internet there's
another one here that's this one this
particular one is called a one-hand Jack
anyway you could use I mean if you're
working on a vehicle that you don't care
about you could use a wedge-shaped piece
of 2x4 lumber you could use a
screwdriver if you don't care about it
but anyway this is the tool and it's
made by access tools I believe it's
called the remote control button master
and when I pull the handle here you see
how the cable comes in and out when I
pull the handle it's just a matter of
pulling the handle in and out and it
tightens up that noose on the end and
you just go in here takes a second to
get in kind of fudge it between the
weather stripping
sometimes a little bit difficult to get
believe oh I haven't waited list I went
out yet okay so sometimes it takes just
a second to get behind the
weatherstripping there and all you got
to do is just find the right angle and
the curvature of the tool basically see
what I'm doing there I'm tightening up
that newest lift up on the door lock
pull the tool back out and then of
course if you can't always make sure you
get the airbags removed out of the door
that relieves any pressure on the door
latch and then doors open just like that
now if I wasn't explaining this job I
could probably open this trunk in about
15 seconds I mean it's really compared
to the old slim jim days this is it now
granted this only works on tools that
have are on cars that have a vertical
lock the locks that go up and down like
that on the door panel
obviously if it's if it's way down here
inside the door it requires a different
tool but I have found that a lot of cars
you know had that style locks years ago
and they never really went away that
particular style lock is very common
even on today's newer cars these
vertical locks so this tool here is very
handy to have they're very inexpensive I
think they're under $40 and like I said
I'll put a link down below in the video
description of where you can find it and
as always thanks for watching be sure
you like share and subscribe watch for
more videos thanks
you
MyChevrolet App: Overview
Bachman Chevrolet:
In this video we're gonna be looking at
the MyChevrolet App.
So here's the app a new open it. A grid of 9 apps total.
First app is roadside assistance. It
shows and pinpoints your car and gives
you a number that you can call for
assistance. Next we've got a parking reminder.
Again, shows you where your car is, it allows you to add a photo as a reminder,
so it opens up your camera so you can take a picture of your car.
And you can also set a note, so you can
remind yourself in words.
For example, "it's over there"...not
very helpful, but that's where your car is.
Next we've got the schedule service, so you can find which dealer you want, what cars
coming in,
what kind of service you need, when you
need to be in a now and out. Then to find a
dealer you can
use your current location, search by zip code, search by dealer name,
or set your preferred dealer.
The next icon is Chevy's current offers
icon and it allows you
to look through all of Chevy's current offers on service and maintenance.
Next is the owner's manual and it's a
digital manual
for your vehicle, so you can look through everything that you would
be able to look through in the physical
manual in your vehicle.
You've also got the lights and indicators
tab that shows you all the different lights
or indicators that may pop up
on your dashboard that you wouldn't know and it gives you a description of what they mean.
Next you've the profile settings, and that
allows you to custom
and tailor the app to you and your
vehicle.
Finally, one of the coolest features is the
OnStar remote link.
Now you have to have this setup with
OnStar,
but it allows you to look through your
wifi connection in your car,
hands-free calling. The map setting
allows you to find where your car is and
pinpoint it, and you can also send
directions.
So I wanna go to Starbucks; I can find it.
I can either call them
or send turn by turn to my car.
Next I can look through my vehicle status
and that shows me my fuel range, my oil
life,
and my tire pressure.
Also it shows me my fuel efficiency.
So over the lifetime the mpgs, how
many miles I've gone,
but the coolest feature is the key fob. It allows me
to lock, unlock, remote start, cancel the start,
turn on the horn and lights, and stop
the horn and lights.
So we'll show you a small
demonstration of the key fob feature,
which is everyone's favorite.
So here we have our Malibu and I just
remote locked it.
So there it's locked, now I'm gonna hit
remote start button.
Now it will take a moment considering
that I'm actually sending the signal to
a satellite
an OnStar satellite in space and
sending it back to the car, but it's
really cool.
There you can see it locks,
and the other lights turn on to show that it just started. Alright now, I'm gonna cancel that start.
I didn't really mean to turn on my car.
So now it's gonna send that signal
again and there it
went, it turned off.
Okay so now my mother-in-law called
me and told me that my car,
somebody's trying to break in my car,
while I'm at the airport so I turn on the horn
and lights.
Pretty helpful.
Now they've run away and I don't
wanna leave it in an airport parking lot
honking,
so hit the button and it turns off.
So that's how to use the MyChevrolet
app and
the accompanying
the OnStar remote link app.
For more videos on all our Chevy models
subscribe to our channel.
How to Program ANTI THEFT or Security on GM cars Hummer, Buick, CHEVY program key
VEHIX411:
Open a Car Door Without Key
doit_vehicles:
How to Unlock Car Door Without key - How to Unlock Car Without Key
Tech4kPro:
How To Break Into a 2012 Chevy Malibu
Dawn Rambles:
how to break into a 2012 Chevy Malibu
let's hope hey guys what's up I am doing
this video from my iphone six-plus
and my hair is a little funky I gotta
fix that so I just wanted to do like a
real simple video real quick just to
kind of come on here and be like oh look
I'm doing my first video on my iphone
six-plus they got it right
check up with you guys later in this
household I guess that would be me any
of you guys know how to break into its
2012 Chevy Malibu um let me know because
I'm in trouble
should I can I have it
come over here go take it
oh I think I hear the crab coming I
think I hear the crab coming here come
the crabs gonna get your food ok guys
I'm in the basement right now I'm in my
PJs I need to help Greg and we can't
find the spare key
that's a Greg salt I mean if the alarm
goes off it can only go off for so long
right and then it just died
listen so dad cannot believe I did this
girl
door start
there people steal cars all the time
right I mean you can't be that difficult
they don't care if they tell you they
don't I should name this video how to
break into 2012 Chevy Malibu we can
always define this very differently this
wouldn't be here the glance of flex
don't get the weather everything's gonna
make it sound last inmate long time
how much I have some husband do it you
got keys oh well that's three times it
was worth the 40 bucks for this thing
the so we did that was Corey
right we did it with Corey I'm not gonna
try to leave my keys oh my god good job
babe that was actually pretty easy and
there's nobody out like around me but
like he was waving to me or nobody else
How To Unlock Car Door When Keys Locked in Car
Car Addict Garage:
Programming instructions for Buick, Cadillac, Chevy, GMC and Hummer up to 2007
carandtruckremotes:
Chevrolet Tahoe Replacement Remote Programming 2000-2006
carandtruckremotes:
Hello, welcome to CarandTruckRemotes.com videos.
Today we’re going to show you how to activate
the remote for a Chevy Truck or an SUV.
Those instructions work for most: ’98 to
about 2006 Trucks, GM trucks, large trucks
and SUVs, also Hummer SUV, you can get the
details on our website, or if you have any
questions give us a call.
Basically, what we’re going to do is, this
vehicle has already two remotes, they work,
we’re just going to program an additional
remote, so a total of three remotes.
Basically, it is a very easy procedure; you
just need to have your ignition key and your
remotes with you.
You have to start with all the vehicle doors
closed, windows closed, you put the key into
the ignition and you hold down the unlock
button on the driver’s door panel: just
keep holding it down.
You then turn the key in the ignition ON and
OFF twice. Then you release the unlock, doors
cycle (lock and unlock), then you grab the
remote, press lock and unlock buttons, keep
holding it down for several seconds, until
you see or hear the locks (lock and unlock).
So, sometimes it takes 15, sometimes 20 seconds
or more.
OK, that worked. Now, since we already had
two remotes, what you want to do is make sure
all of them are programmed.
So, we follow the same procedure for all of
the existing remotes, just to make sure that
all of them will work again. It may take 15-20
seconds or so, and we’re doing it to make
sure that all of them will be synchronized.
Ok, we are not getting the response from this
one, let’s try that. Maybe they will all
work without resynchronizing. OK, it may take
several more seconds and then we’ll try
to test the remotes. Ok, very good.
Now we turn the ignition ON. That’s how
you exit the programming procedure. OK.
Now let’s see if the remote works. This
remote didn’t work, Works! (*click *click).
OK, we’re done.
This is how you program the remotes.
Again, it works for: GM trucks like a Silverado,
Sierra, Tahoe, Suburban, Blazer, Trailblazer,
Envoy, Hummer, H2. Again, you’ll probably
get the list at the end of this video on the
YouTube website as well, you can check on
our website at CarandTruckRemotes.com
Thank you very much for watching. If you have
any questions, give us a call or check our
website at CarandTruckRemotes.com.
Thank you. Bye, Bye.
Posting Komentar
Posting Komentar